|
| |
|
|
Use of Mobile Device Sensors in a Car
Aron, Lukáš ; Široký, Vít (referee) ; Žák, Pavel (advisor)
This thesis analyses the use of an accelerometer commonly present in a mobile device for the measuring of vibration in a vehicle. Such measurements are used to map the quality of the road surface. The signal from the accelerometer and the current travelling speed of the vehicle are evaluated according to a threshold function. This function allows for a determination of whether the signal reported by the device signifies a pot-hole or another type of defect on the road surface. If the defect is determined to pose a threat to a vehicle travelling at higher speeds, then this fact is saved into the memory of the device. The second part of this thesis deals with the design of an internet and a mobile application, which is able to collect all measured data processes using cluster analysis and then shares the results with other participating devices. Tha practical results is that a map of road surface defect is thus created, which is then displayed to road users. This thesis deals with theory of mobile device sensors, including signal processing, as well as the design creation of the internet and mobile application.
|
|
| |
|
|
Mobile robot control system
Bugár, Loránt ; Jílek, Tomáš (referee) ; Hynčica, Ondřej (advisor)
Bachelors project is fixated for creating a mobile robot with a real time operating system. The robot control system is based on a microcontroller Arduino with ARM Cortex-m3 processor. The practical part is dealing with resolving the client-server communication with the UDP protocol, also with the identification of the engine from measured data’s by the Simulink and subsequently designing the PI regulator from the identificated data’s. In he last part of the work the focus is giving to solving the communication with I2C bus and using sensors like : accelerometer, ultrasonic sensor, infra sensor, light sensor, hall sensor and usage of a robotic arm. An application is created for controlling the robot and for visualisation of sensor readings..
|
|
|
Advanced scoring of sleep data
Jagošová, Petra ; Novotná, Petra (referee) ; Ronzhina, Marina (advisor)
The master´s thesis is focused on advanced scoring of sleep data, which was performed using deep neural network. Heart rate data and the movement information were used for scoring measured using an Apple Watch smartwatch. After appropriate pre-processing, this data serves as input parameters to the designed networks. The goal of the LSTM network was to classify data into either two groups for sleep and wake or into three groups for wake, Non-REM and REM. The best results were achieved by network doing classification of sleep vs. wake using the accelerometer. The statistical evaluation of this best-designed network reached the values of sensitivity 71,06 %, specificity 57,05 %, accuracy 70,01 % and F1 score 81,42 %.
|
|
|
Wireless security facility
Gargulák, Lukáš ; Morský, Ondřej (referee) ; Zeman, Václav (advisor)
The content of this thesis is the design, construction and programming of wireless security device. This wireless security system consists of two units. Personal unit and sensor unit. This thesis compares two ISM bands 433 MHz and 868 MHz. The thesis presents a selection of parts for construction wireless security device. The work also deals with the structure of transmitted frames on the link layer. Marginally are discussed ways to reduce consuption AtmelAVR microcontrollers and also two ways of charging Li-Ion battery. It also outlined the firmware of both units. Its complete source code is included on the DVD.
|
|
|
Augmented Reality for Mobile Devices for Precise Urban Navigation
Murín, Michal ; Herout, Adam (referee) ; Beran, Vítězslav (advisor)
Diplomová práce je zaměřená na rozšířenou realitu a její realizaci pro mobilní platformu Android. V teoretické části je kladen důraz na obeznámení se s principy rozšířené reality, možnostmi její realizace pro mobilní platformu Android, která je také podrobněji představena. V praktické části se dále zaměřuje na návrh a realizaci knihovny a aplikace využívající tuhle knihovnu pro tvorbu rozšířené reality na platformě Android pomocí GPS a polohových senzorů. Aplikace slouží jako navigace a zobrazuje cestu ke konkrétnímu cíly, jak v podobě rozšířené reality, tak i na klasické dvourozměrné mapě. Práce podrobně popisuje navrhované řešení knihovny a aplikace a jejich implementaci. Nakonec popisuje testování, zhodnocuje dosažené výsledky a diskutuje nedostatky výsledného řešení a možnosti jeho vylepšení, respektive rozšíření.
|
|
|
Flight statements electronic sensor.
Harant, Josef ; Fedra, Zbyněk (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with theoretical analysis, design and practical solution of flight statements electronic sensor. This device is primarily intended for measuring telemetry data during aerobatic flights. Theoretical part contains fundamentals of GPS and inertial navigation systems. Design of the device is divided into three parts - design of block structure, construction and software for the measuring device. The final realization is made with respect to minimal system requirements and to possible future extensibility for wider usage spectrum.
|
|
|
Accelerometer-based monitoring of steering wheel angle
Navrátil, Tadeáš ; Jirgl, Miroslav (referee) ; Mihálik, Ondrej (advisor)
This thesis deals with the design of a device which will be used for measuring the steering wheel angle. Main goal was to design basic concept of device which is using data gathered from three accelerometers in the reconstruction algorithm to get steering wheel angle. Discussion of various reconstruction algorithms (with regards to simulated output noise levels from acceleromater) and final Implementation of reconstruction algorithm (in MATLAB simulink enviroment) is also part of this thesis. Furthermore, thesis deals with the selection of suitable components. Mainly selection of accelerometers, microcontroller and the selection of a suitable communication bus for mutual communication between them. Thesis also deals with design improvements of algorithm and realization of the whole device. In the end, we compare results of measuring device and inner senzor of steering wheel.
|
|
|
Remote controlled wheel robot
Ruhás, Sándor ; Kříž, Vlastimil (referee) ; Florián, Tomáš (advisor)
Tato práce se zabývá návrhem a vytvořením kolového robotu na dálkové ovládání. První část práce obsahuje základní úvod do robotiky. Poté se čtenář seznámí se všemi kroky návrhu, které byly provedeny. Samotná konstrukce je rozdělena do dvou hlavních částí: návrh hardware a software. V kapitole návrhu hardware se čtenář dozví, jaké součástky byly vybrány a proč. Pro vysvětlení funkce součástek, budou uvedeny některé důležité parametry. Protože většina součástek může být nastavena různým způsobem, jsou hlavní nastavení detailně popsána. V dokumentu je také uveden jednoduchý ilustrovaný popis hlavních funkcí obslužného software. Na konci tohoto textu jsou diskutovány dosažené výsledky.
|
guest ::
